Custom Oak Butcher Block (Special Order)
Red or White (Fingerjointed/Non Fingerjointed)
Orders received by 4 p.m. Friday can be shipped as early as Friday of the following week.
Exceptions: Plank which exceed 48" in width often require several extra days.
Perfect Plank Co. does not maintain accounts. Most customers send a check at the time of
order or use a major credit card.
Orders are shipped freight collect from Oroville, California. Orders weighing more than 70
pounds are shipped via XPO Logistics. Orders weighing less than 70 pounds (within size
limits) can be shipped UPS. (Other limitations apply)
Upon receipt of order, it is essential that you inspect the freight for damage prior to signing
the delivery receipt! (DOES NOT APPLY TO UPS SHIPMENTS) Unsatisfactory merchandise
can be returned after receiving verbal approval from the Order Desk. Replacement will be
made for defects which are the result of manufacturing error. However, the Perfect Plank
Co. cannot accept responsibility for those defects which are inherent in the species of
wood. In all cases, the liability of the Perfect Plank Co. shall be limited to the sale price of
the item and shall not be extended to include the value of any labor or materials used in
finishing or installing the product.
Upon receipt, it is essential that you finish the ends and BOTH sides of the plank immediately in
order to avoid cupping or warping. All wood products are sensitive to changes in
temperature and humidity, and care must be taken to prevent exposure to environmental
Perfect Plank Order Desk: 1-530-533-7606
Toll Free Number: 1-800-327-1961
2850 S Fifth Ave, Oroville, CA 95965
Oak is a highly revered species that is used primarily for furniture and table tops, but which also
can be used for kitchen counters and islands. It is prized for its hardness and durability. Perfect Plank is
produced from Red or White Oak originating in New York and Pennsylvania.
Perfect Plank does not currently inventory Oak. Custom orders with larger quantities justify
the higher freight rates, while smaller orders do not. For this reason orders with smaller quantities
are usually not accepted as they are cost prohibitive. On occasion we do have some material
available and we encourage customers to e-mail or call for availability of Perfect Plank Oak.
Depending on it’s availability on the market, Perfect Plank Oak can be manufactured at a
maximum thickness of 1 7/8" and potentially any length up to 12 feet. Timeframe can vary based on
availability of material and quantities ordered. Several months in advanced is highly encouraged.
As with other species, Oak is manufactured by finger-jointing pieces of 6" to 24" into strips of the
desired length. Then the strips are glued face-to-face with water resistant polyvinyl glue to create the
finished plank. If necessary (at our discretion) a butt-joint may be used for the entirety of an order in
place of the finger-joint (as shown in pictures below). One face is of furniture quality, sanded with 120
grit paper. Reverse side may contain defects and is sanded with 80 grit paper.